AMT Datasouth 600 Guia do Utilizador descarregar pdf (Página 83)

Fastmark 600 Series User's Guide 83

Parallel (Centronics) Interface

The parallel port uses a standard 36-pin Centronics connector.

Pin Direction Definition Pin Direction Definition

1 In /STROBE 13 Out SELECT

2 In Data 1 14,15 NC

3 In Data 2 16 - Ground

4 In Data 3 17 - Ground

5 In Data 4 18 NC

6 In Data 5 19 to 30 - Ground

7 In Data 6 31 NC

8 In Data 7 32 Out /Fault

9 In Data 8 33 to 36 - NC

10 Out /ACK

11 Out BUSY

12 Out PE

Auto Interface Select

The setup feature Interface Select controls the operation of interface arbitration. One of 3 settings is possible:

Parallel Only: With this setting the serial interface is ignored.

Serial Only: With this setting the parallel interface is ignored.

Auto Select: With this setting, the printer automatically arbitrates between the parallel and serial interfaces. The first

interface to go active maintains active status while the other interface is held busy. After a time out period, the other

interface is placed in a ready state.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 89

Sem comentários

AMT Datasouth 600 Guia do Utilizador Página 83