AMT Datasouth Fastmark M7 Series Guia do Utilizador descarregar pdf (Página 36)

Page of 73 36

The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.

DIRECTION 0 DIRECTION 1

Note: If printing from enclosed software/driver, the software/driver will send

out the command, which will overwrite the setting set from the front

panel.

3.1.1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)

This option is used to set the print mode. Printer default setting is Batch Mode.

When enter this list, the print mode in the right side of " >" icon is the printer current

setting. Press and to select the different print mode and press

button to enable the setting. Press key to cancel the setting and

return to the previous menu.

Printer Mode Description

None

Next label top of form is aligned to the print head

location. (Tear Off Mode)

Batch Mode

Once image is printed completely, label gap/black mark

will be fed to the tear plate location for tear away.

Peeler Mode Enable the label peel off mode.

Cutter Mode Enable the label cutter mode.

Print Setup 4/12

Density

Direction

> Print Mode

Print Mode 2/6

> Batch Mode

Peeler Mode

Cutter Mode

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 72 73

Sem comentários

AMT Datasouth Fastmark M7 Series Guia do Utilizador Página 36