AMT Datasouth Accel-7450 Manual do Utilizador descarregar pdf (Página 15)

ACCEL-7450

Vertical Print Registration

Scope:

This adjustment is used to align first line of print vertically in relation to the top of form.

Required materials:

 Cut-sheet paper

Procedure:

1. Select control panel AUTO print gap, and Cut Sheet modes.

2. Power ON printer.

3. Load a sheet of cut-sheet paper.

4. Press and hold the ENTER key for six seconds to enter “TOP EDGE ADJUST”

mode.

5. Press LF or RLF keys to adjust paper up or down. NOTE: LF key moves paper up,

print down on the page. RLF key moves paper down, print up on the page. Paper

moves 1/60 inch (10/60 inch maximum).

6. Press ENTER key to save new paper setting and exit.

END OF PROCEDURE

Tear Off (pin feed present distance)

Scope:

This adjustment is used to align the tractor pin feed paper tear off position.

Required materials:

 Tractor pin feed paper

Procedure:

1. Install tractor assembly and continuous pin feed paper.

2. Power ON printer.

3. Press and hold the TEAR OFF key for six seconds to enter adjustment mode.

4. Press LF key to increase, or RLF key to decrease paper location in reference to

the printer enclosure tear off position.

5. Press the ENTER key to save new setting.

END OF PROCEDURE

1 2 ... 10 11 12 13 14 15 16 17 18

Sem comentários

AMT Datasouth Accel-7450 Manual do Utilizador Página 15