AMT Datasouth Accel-7450 Manual do Utilizador descarregar pdf (Página 7)

ACCEL-7450

Calibration/Default Reset

HIGH IMPACT

Pressing this key temporarily changes the print impact for multipart forms

from NORMAL to DARK print mode. The HIGH IMPACT LED light is ON

when DARK print mode is selected.

Pressing this key feeds the line in the forward direction at a pitch of 1/6 inch

regardless of the LF PITCH setting in the printer’s control panel menu.

Holding this key down produces continuous forward line feeding.

ENTER

Pressing this key selects the setting displayed on the LCD.

RLF

Pressing this key feeds paper in the reverse direction at a pitch of 1/6 inch

regardless of the LF PITCH setting in the printer’s control panel menu.

Holding this key down produces continuous reverse line feeding.

ALT + JAM

REMOVAL

Pressing this key combination allows paper to be easily removed. Use this

special mode if the EJECT key does not discharge the paper.

ALT + DARK

FORM

Pressing this key combination causes the printer to load manual feed forms

regardless of their color. Use this special mode if printing starts at the wrong

place due to non-reflective (dark) areas on a form.

ALT + RESET

Pressing this key combination evokes a power on reset and clears print

buffer. The LCD displays “INITIALIZING” for a few seconds then returns to

ready mode.

ALT + FF

Pressing this key combination advances paper one form distance.

ALT + MENU

Pressing this key combination opens the printer’s control panel menu system.

Refer to the USER MANUAL for features and selection procedure.

ALT + MICRO

Pressing this key combination micro feeds the line in the forward direction at

a pitch of 1/20 inch intervals.

ALT + MICRO

RLF

Pressing this key combination micro feeds the line in the reverse direction at

a pitch of 1/20 inch intervals.

INITIALIZATION

#1 (No Paper)

Power-up while pressing HIGH IMPACT + LF keys together. LCD will display

INITIALIZING… EEPROM INITIAL 1. User settings are restored.

INITIALIZATION

#2 (Cut-sheet)

Power-up while pressing SPEED + TEAR OFF keys together. LCD will

display INITIALIZING… EEPROM INITIAL 2 / Cut Sheet. Sensor threshold

settings are set.

INITIALIZATION

#2 (Tractor)

Power-up while pressing ONLINE + EJECT/LOAD keys together. LCD will

display INITIALIZING… EEPROM INITIAL 2 / Tractor. Tractor sensor

threshold setting is set.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Comentários a estes Manuais

Sem comentários

AMT Datasouth Accel-7450 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir AMT Datasouth Accel-7450