AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 430)

Supported Printers and Drivers

Forms Control Section

Label Rest Point

Label rest point adjusts the point at which the printer presents the labels for removal.This

command is commonly used with the self-strip option.Label retract is available to retract the

label back to the correct starting position for the next printed label.

Enable Label

Retract

This feature causes the printer stock to move back into the printer under the printer head, print

the label, then feed the label out to the tear off bar.

Feed After Print

Feed After print instructs the LLM to add a Form Feed (<FF>) after the label is

printed.Generally, this is not necessary but it may be required for certain applications.

Set Label Width

(440x printers only) The 440x printers have a centered paper path so the label width is used to

position the printing on the label.This option should be enabled in most cases.

Intermec Fingerprint/Direct Protocol Options

Fingerprint/Direct Protocol Options may be label-specific or printer-specific.These options are for

Intermec printers that support the Fingerprint/Direct Protocol printer language.

Direct Protocol Label Specific Options

Label Specific Options (LSOs) can be accessed when you click Label Options from the Label Setup and

Properties dialog (F5).

UBI Label Specific Options

Format

This allows you to choose a unique format number for storage in the printer's memory.Read the

Owner's Manual as all files in the printer may be permanently erased by using this instruction.

Print Speed

(mm/s)

The rate that the printer prints. The range is 50-400 millimeters per second. See the documentation

for your printer to find the allowed values.

Performan

The performance range varies with the selected printer type. In this case, the choices are Normal,

High, or Ultra High.

Label Cut Options Section

Cut

Option

Choose Printer Cut Options (as set in PSOs, which is the default setting) or the Label Cut Options which

may be chosen along with the following setting.

Feed

Length

Zero is the default, but the Cut Interval may be set to cut after any number of labels.

Advanced Options Section

Character Set

Allows you to choose from a list of Character Sets or use the Character Set from the

PSOs.

Direct Protocol RFID Options

The following sections are available when designing RFID tags for Intermec Fingerprint (FP) language

RFID printers.

Note: The Intermec PM4i RFID (FP) Printer is created with UBI printer language.

Loftware Label Manager Version 10.1.1 User's Guide

430

1 2 ... 425 426 427 428 429 430 431 432 433 434 435 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 430

Comentários a estes Manuais