AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 504)

100

101

Supported Printers and Drivers

HF Tag Type Configurable Data Blocks

TI HF Tag-it

User data is contained in blocks 0-7. Each block consists of 4 bytes.

Supports Lock Tag after Writing and Overflow features.

TI HF Tag-it ISO

15693

User data is organized into 64 blocks (0 to 63). Each block consists of 4 bytes. RF interface is

defined by the ISO 15693 standard.

Supports Lock Tag After Writing, Overflow, AFI, and DSFID features.

The following UHF tag types are supported by Loftware.See also the next section on RFID Devices and

Tag Types.

UHF Tag Type User-accessible Data Blocks

UHF 64-bit Class 1

PC block = 1 byte - used to lock the tag

EPC block = 8 bytes - used for EPC / DOD / URI

UHF 96-bit Class 1

PC block = 1 byte - used to lock the tag

EPC block = 12 bytes used for EPC / DOD / URI

UHF 96-bit Class 0+

KC block = 3 bytes - used to lock the tag

EPC block = 12 bytes used for EPC / DOD / URI

USR block = 13 bytes - used for user specific

data

UHF UCODE EPC

1.19

Block #0 = 12 bytes

UHF ISO 18000-6B Block #0 = 200 bytes

UHF Class 1 Gen 2

32-bit Access Password

32-bit Kill Password

96-bit EPC

32-byte USR block

RFID Devices and Tag Types

In order to encode data on RFID labels and tags, an RFID device must support specific RFID

commands.Some RFID printers exclusively support encoding to UHF tag types.Others will write only to

HF tags.A few printers support both UHF and HF tags.

The tables below list current Loftware RFID printers and the tag types each supports.

RFID UHF Printers

This table shows Loftware RFID Gen 1 and Gen 2 UHF printers for smart labels and the UHF tag types

each supports.

Loftware Label Manager Version 10.1.1 User's Guide

504

1 2 ... 499 500 501 502 503 504 505 506 507 508 509 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 504

Comentários a estes Manuais