AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 482)

100

101

Supported Printers and Drivers

Issue Settings Section

Cut

Interval

This designates the number of pieces to be printed before the label is cut.

The range is 000 to 100 (no cutting occurs when set at 000).

This setting may yield unexpected results if you use a value that is not an even multiple of the Quantity

and/or Duplicates value.

For example

If Quantity = 2, Duplicates = 3, and CutInterval = 2, your labels may print/cut in the following

sequence:

Label 1 Duplicate 1

Label 1 Duplicate 2

<CUT>

Label 1 Duplicate 3

<CUT>

Label 2 Duplicate 1

Label 2 Duplicate 2

<CUT>

Label 2 Duplicate 3

<CUT>

Backfee

When this check box is enabled, printer backfeeds the stock prior to the printing of the next label a

specified distance from 30 to 2000 dpi.

Note: When using the LPS, note that each occurrence of a *PrintLabel command constitutes a print request.

Note: All measurements are in tenths of a millimeter.

Fine Position Adjustments Section

Enable

When checked, the adjustments listed below become active, and can be

set.

Feed Range is set between –500 to +500 mm.

Cut/Strip Range is between from –500 to +500 mm.

Backfeed Range is between from –99 to +99 mm.

Graphics Method Section

OR Drawing

Overwrite

Drawing

Overwrite Drawing is the default PSO setting. Graphic data is drawn, overwriting data in the

image buffer.

Custom Command Section

Command

You may enter a custom TPCL command string here. You must include

the command prefix and terminators (“{“and “|}”).

Loftware Label Manager Version 10.1.1 User's Guide

482

1 2 ... 477 478 479 480 481 482 483 484 485 486 487 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 482

Comentários a estes Manuais