AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 480)

100

101

Supported Printers and Drivers

Fine Position Adjustments Section

Use

Printer

Setup

Use the setting from the device Options dialog box.

Feed Range is set between –500 to +500 mm.

Cut/Stri

Range is between from –500 to +500 mm.

Backfee

Range is between from –99 to +99 mm.

Graphics Method Section

Use Printer Setup

This is the default setting and applies the setting selected in the Printer Setup

dialog.

Overwrite Drawing example

OR Drawing example

Custom Command Section

Command

You may enter a custom TPCL command string here. You must

include the command prefix and terminators (“{“and “|}”).

This command is sent when printing a label and when clicking Send To Printer. It is sent

immediately prior to the buffer clear command.

RFID Option Section

Override

Printer

Setup

When checked, the Tag Position setting on this dialog will be used, overriding the selection made

from the Printer Specific Options dialog.

Tag

Position

This sets the feed amount to adjust the RFID tag position before data is written to it. Tag Position can

be adjusted in units of 0.1 mm. Feed direction: + : forward, - : backward

TEC Printer Specific Options

Printer Specific Options (PSOs) can be accessed by clicking Options while configuring the printer or by

selecting the printer from the Device Configuration grid and clicking Options.

Loftware Label Manager Version 10.1.1 User's Guide

480

1 2 ... 475 476 477 478 479 480 481 482 483 484 485 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 480

Comentários a estes Manuais