AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 462)

100

101

Supported Printers and Drivers

Interface Cables (Parallel, Serial and USB)

Interface Description

Parallel Interface

(optional

interface)

Using a standard parallel cable, plug the hardware license key into a LPT parallel port,

and connect the cable between the key and the printer.

Serial Interface

(standard

interface)

Use an RS232-C null modem cable.The hardware license key is not part of the serial

interface since it must always be plugged into a LPT parallel port. Some Datamax may

require other serial configurations.

USB Interface

(standard or

optional interface)

Use a standard USB cable between the printer and computer (or server), and plug in

either a USB or Parallel hardware license key to one of the other ports on the

computer.

Printronix Options

Printronix Options may be label-specific or printer-specific.

Printronix Label Specific Options

Label Specific Options (LSOs) can be accessed when you click Label Options from the Label Setup and

Properties dialog (F5).

Label Options Section

Print Speed (IPS)

The range of available print speeds in inches per second (IPS)

varies with the selected printer type. Note that the printer may use

a slower print speed than you specify in order to maintain print

quality.

Slew Rate (IPS)

This setting affects the speed in inches per second (IPS) at which

the paper is fed when advancing over non-printing areas. This

setting may affect printer throughput.

Darkness

This allows you to control the darkness of the print. -3 is nominal;

setting the temperature higher than -3 causes the label to print

darker. Temperature settings lower than -3 cause the label to print

lighter. The valid values range from -15 to 15.

Format Number

Specifies the areas of RAM in which the label format is to be stored.

The valid values are 1-100.

Print Quality

This setting only applies to the P5000 Series line matrix printers

and is somewhat similar to the darkness control on the thermal

transfer printers.

n Best - prints the darkest images, but at the slowest speed.

n High - prints at a faster speed than Best, but the characters

are not as dark.

n Data Processing - This mode should be set if the highest

speed is desired, printing is not as dark as High.

Loftware Label Manager Version 10.1.1 User's Guide

462

1 2 ... 457 458 459 460 461 462 463 464 465 466 467 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 462

Comentários a estes Manuais