AMT Datasouth Fastmark M1 Guia do Utilizador descarregar pdf (Página 434)

Supported Printers and Drivers

RFID Setup Options Section

Send Setup Options to

Printer

When checked, settings selected in this dialog will be used for printing the label.

Void Text This is the text that will be printed across the label after write retries fail.

Tag Adjust

The position of the label will, if necessary, be adjusted before trying to write data to the

tag. The Unit of Measure is Dot Rows.

Labels to Retry on Tag

Access Failure

This sets the number of attempts to write to the label after an unsuccessful try.Settings

range from 0 to 10.

Intermec - Printer Capabilities and Limits

Capability Description

Faster

Throughput

For faster throughput always use a parallel port interface.

Maximum

Number of

Fields

The maximum number of fields per label format is between 40 and 200, but this varies between

printer models.

Maximum

Image Size

The maximum size of any image varies among printers. The physical size of the image depends on

the resolution of your printer. For 203 dpi printers, this is roughly 3" by 3".Note that the actual size

of images that your printer can handle is determined by the amount of RAM installed in your printer.

Images Do

Not Print

If images are displayed in Loftware Label Manager label design but do not print, the printer probably

does not have enough memory to store the image.If you are using a 440x printer, a "Memory

Overflow" message is displayed on the control panel. If you are going to be working with large

images, you may need to add additional UDC RAM to the printer. Contact Intermec for information

on memory upgrades for your printer.

Printed

Barcode

Does Not

Match the

Design

It is possible to define a combination of attributes, such as line width, ratio, etc, that the printer

cannot produce, or might print in one orientation, but not another. Under these conditions, the

printer may print the "closest possible" barcode. This usually occurs when you define a barcode with

line width 1.The printer sometimes "promotes" this to a line width 2 barcode, resulting in a printed

barcode that is twice as long as desired.

Disappearin

g Fields

The Advanced printers do not print any field with an invalid definition. For example, if you define a

UPC-A barcode, which requires exactly 11 digits, and then provide alphabetic data at print time, the

printer does not print the field. If your label test prints correctly but fields do not print in production

printing, check your data carefully to make sure it is valid.

Using CODE

128

The Intermec Advanced printers use “auto-discriminating” Code 128 logic. This means that the

printer decides which subset of Code 128 to use based on the data for the barcode.The printer

automatically shifts subsets if necessary. While this technique produces the densest possible

barcodes, it makes it difficult to implement a specification that requires explicit control of subsets or

shifts between various subsets.

Note: Refer to the section on how to build a GS1-128 (UCC-128) symbology in this guide.

Loftware Label Manager Version 10.1.1 User's Guide

434

1 2 ... 429 430 431 432 433 434 435 436 437 438 439 ... 531 532

Comentários a estes Manuais

Sem comentários

AMT Datasouth Fastmark M1 Guia do Utilizador Página 434

Comentários a estes Manuais